| Model | PB-100ST |
| Product type | Photoelectric Beam Sensor |
| Detection system | Simultaneous breaking of 2 beams |
| Infrared beam | LED pulsed beam, Double modulation |
| Protection distance | Outdoor 100m (330ft) or less Indoor 200m (660ft) or less |
| Max. beam range | Outdoor 1000m (3300ft) or less Indoor 1000m (3300ft) or less |
| Response time | 50msec. to 700msec. (Variable at pot) |
| Supply voltage | 10V to 30VDC (Non-polarity) |
| Current consumption | 80mA or less |
| Alarm output | Dry contact relay output form C Contact action : Interruption time + delay time Contact capacity : 30V AC/DC, 0.5A or less |
| Tamper output | Dry contact relay N/C Action : Activated when cover is detached Contact capacity : 30V AC/DC, 0.5A or less |
| Alarm LED | Red LED (Receiver) ON : when an alarm is initiated. |
| Attenuation LED | Red LED (Receiver) ON : when beam is attenuated. |
| Functions | Monitor jack output, AGC circuit, Frost proof cover |
| Ambient temperature range | -25°C to +60°C (-13°F to +140°F) |
| Mounting positions | Indoor / Outdoor |
| Wiring | Terminals |
| Weight | Transmitter : 1200g (42oz) Receiver : 1200g (42oz) |
| Appearance | PC resin (wine red) |
