22-HE-TPS05

HELTUN Touch Panel Switch is the only Z-Wave touch panel this size with up to 5 buttons and up to 5 dry contact relays.

​

Touch Panel Switch is an ideal tool for controlling your lighting and motorized appliances. It supports up to five AC and DC appliances connected to a single device and provides a remote control and monitoring solution for an almost infinite number of use cases.

​

This includes, but not limited to, smart control of any kind of lighting, motorized shades, curtains, roller shutters, gates, garage doors, pool covers, smart irrigation, 3-way and 4-way switches, bathroom fans, even group control of thermostats in your house!

Specifications

• Front frame dimensions: 89x89x9mm
• Back dimensions: 53x53x28mm
• 3 frame colors: Silver, Black, White
• 2 glass colors: White, Black (Yellow, Green, Red, Blue on request)
• 5 sensitive capacitive touch buttons
• Red and Blue color LED back light for each button
• 10 adjustable brightness levels for each button backlight
• Power supply: 85VAC – 265VAC, 50Hz/60Hz or 24-48VDC
• 5 relays with resistive load up to 5A each
• 2 independent relay inputs, dry contact type
• Relay life time: 100 000 switches
• Z-Wave Frequency: All countries
• Z-Wave SDK: V7.11.1
• Z-Wave Plus module: ZGM130S

Features

• Security levels: Non-Secure, S0, S2, S2 authenticated
• Smart Start inclusion
• Independent control of each relay and LED
• Each relay can be controlled by any touch button or via a Z-Wave network (Z-Wave controller)
• Each touch button can be used to run scenarios
• Each button backlight can be configured to indicate the state of relay output, touch button, associated device, mode of connected gateway
• Embedded ambient light sensor
• Embedded room temperature sensor
• Embedded humidity sensor
• Software energy consumption meter logic
• Adjustable LCD brightness: Auto or Manual
• Child lock
• OTA firmware updates
• Manual change of frequency

Button Configurations

Each touch button can be configured to control any relay (from one and up to five) output state as follows:

• press the button and the relay output goes to an ON state only
• press the button and the relay output goes to an OFF state only
• press the button and the relay output inverts the state
• press the button and the relay output goes to ON for
• press the button and the relay output goes to OFF for >span class="s2"
• >span class="s1">when the button is held the relay output is ON, as soon as the button is released, the relay output state changes to OFF
• when the button is held the relay output is OFF, as soon as the button is released, the relay output state changes to ON